ViVA DX Bag Supporter Stainless Steel | Stable Support for Large Saddle Bags A long-running Japanese bag support designed to keep larger saddle bags securely supported on touring bikes and randonneurs. The ViVA DX Bag Supporter Stainless Steel is designed to support large saddle bags from underneath, helping reduce sagging and contact between the bag and rear tire. Based on a long-running design that has been used for nearly 50 years, this version uses a solid 7mm stainless steel body for improved durability and corrosion resistance. It is well suited to touring and longer rides where additional luggage is often carried. Mounted to the seatpost, the support provides a stable platform beneath the saddle bag. Its recommended load capacity is up to 5kg, making it suitable for medium-to-large touring bags. The clamp is designed so the supporter can be installed or removed without taking the seatpost out of the frame. It fits round seatposts from 25.4mm to 31.8mm in diameter, and a rubber shim tape is included for installation. Compatible with medium-to-large saddle bags such as the OSTRICH S-2, the DX Bag Supporter also complements the classic appearance of randonneurs and traditional touring bikes. Made in Japan. 【FEATURES】 ・Designed to support medium-to-large saddle bags ・Long-running design used for nearly 50 years ・Solid 7mm stainless steel body ・Recommended load capacity of up to 5kg ・Helps reduce bag sag and contact with the rear tire ・Clamp allows installation without removing the seatpost ・Fits round seatposts from 25.4mm to 31.8mm ・Rubber shim tape included ・Compatible with bags such as the OSTRICH S-2 ・Made in Japan 【SPEC】 ・Brand: ViVA ・Model: DX Bag Supporter Stainless Steel ・Compatible Seatpost Diameter: 25.4mm-31.8mm, round seatposts only ・Material: Stainless steel body / Aluminum clamp ・Weight: 353g, catalog value ・Load Capacity: 5kg, recommended ・Included: Rubber shim tape ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/viva-dx-bag-supporter

SimWorks by NITTO Burrito Rack | A Compact Rear Rack Designed for Rolled Gear A lightweight rear rack made for carrying rolled jackets, sleeping bags, and other compact gear without overwhelming the look of your bike. As its name suggests, the SimWorks by NITTO Burrito Rack is designed to carry gear rolled into a burrito-like shape. Its gently curved platform helps hold rolled windbreakers, shirts, bike travel bags, sleeping bags, and blankets in place. Secure the load with straps or a cargo net for simple, practical carrying on daily rides and longer trips. The compact design adds carrying capacity without the visual weight of a large touring rack. It can also support a small rear bag, making it suitable for commuter bikes, touring bikes, gravel bikes, and old-school MTB builds. Made by NITTO from slender chromoly tubing, the rack has a clean appearance that complements the bike even when nothing is loaded. It can be installed on frames with rack eyelets. The included clip bands also allow installation on seatstays without eyelets. Studs beneath the rack provide additional attachment points for straps or a cargo net. 【STAFF REVIEW】 At first glance, you may wonder what such a small rack can carry, but its carefully considered size becomes clear once you start using it. It provides enough space for a windbreaker, shirt, bike travel bag, or compact sleeping bag without making the bike look as heavy as it might with a full-size rack. The slender chromoly tubing works especially well with commuter bikes and old-school MTB builds. It is a practical option for riders who occasionally need to carry a small amount of extra gear. 【FEATURES】 ・Designed for carrying rolled jackets, sleeping bags, and other compact gear ・Gently curved platform helps rolled items sit securely ・Can be used as support for a compact rear bag ・Slender construction made from 9mm chromoly steel tubing ・Compatible with frames equipped with rack eyelets ・Included clip bands allow installation on seatstays without eyelets ・Lower studs can be used as attachment points for straps or a cargo net ・Suitable for commuter, touring, gravel, and old-school MTB builds 【SPEC】 ・Product Name: SimWorks by NITTO Burrito Rack ・Material: 9mm CrMo Steel Tube ・Colors: Chrome, Black ・Weight: Approx. 325g, excluding Connection Rods ・Maximum Load: 10kg ・Compatible Seatpost Diameter: 26.8-27.2mm ・Required Clearance: At least 120mm between the top of the rear tire and the clamp position ・Included: Connection Rod 210mm × 2 ・Included: Connection Rod 350mm × 2 ・Included: Clip Band 22mm × 2 ・Included: Rubber Band for Seat Post × 1 ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-by-nitto-burrito-rack

NITTO × RIVENDELL 52F-2 Basket Rack | Refined Design with Practical Carrying Capacity More than a platform for carrying cargo, this collaborative front rack brings a clean and balanced appearance to the entire bike. The NITTO × RIVENDELL 52F-2 Basket Rack was developed to combine RIVENDELL’s approach to functional design with NITTO’s precise Japanese manufacturing. Its slim 9mm chromoly tubing is joined with smooth fillet-brazed construction, creating a clean silhouette while supporting loads of up to approximately 9kg. It is suited to everyday shopping, commuting, and loaded touring. The dull-plated finish has a subtle, understated sheen that pairs naturally with classic bicycles, touring bikes, and commuter builds. Both the platform and support stays offer sliding adjustment. The rack is compatible with rack-mounted rigid frames using 26- to 29-inch wheels, including 650B and 700C bikes. Measuring 30.8cm × 25cm, the platform is well suited to WALD 137 and 139 baskets. It can be used as a practical front rack for daily cargo or as a stable base for carrying gear on longer rides. 【FEATURES】 ・Collaborative front rack developed by NITTO and RIVENDELL ・Slim 9mm chromoly tubing ・Smooth fillet-brazed construction ・Subtle dull-plated finish ・Platform size suited to WALD 137 and 139 baskets ・Sliding adjustment for both the platform and support stays ・Compatible with rack-mounted 26- to 29-inch rigid frames ・Maximum load of approximately 9kg ・Suitable for commuting, shopping, and touring 【SPEC】 ・Product Name: 【NITTO × RIVENDELL】52F-2 Basket Rack ・Compatible Frames: Rack-mounted rigid frames with 26- to 29-inch wheels, including 650B and 700C ・Platform Size: 30.8cm × 25cm ・Material: 9mm Chromoly Tubing ・Finish: Dull Plated ・Maximum Load: Approx. 9kg ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-rivendell-52f-2-basket-rack

BLUE LUG double leg kickstand | Stable Two-Leg Support for Everyday Utility Bikes An adjustable aluminum kickstand designed to support the bicycle from both sides when parked. The BLUE LUG double leg kickstand uses a two-leg design to provide additional stability while the bicycle is parked. With the stand deployed, the two legs support the bike from both sides, helping reduce movement when loading or unloading bags. It is a practical option for everyday shopping bikes, commuters, touring bikes, and bicycles equipped with racks. The lightweight aluminum body features a simple mechanism that can be deployed and folded with your foot. Its height can be adjusted without tools, and it is compatible with wheel sizes up to 700C. Plastic feet help reduce damage to the ground or floor surface. Available in black or silver, this kickstand is designed for frames equipped with a dedicated kickstand mounting plate. 【FEATURES】 ・Two-leg design for added stability while parked ・Lightweight aluminum body ・Simple foot-operated folding mechanism ・Tool-free height adjustment ・Plastic feet designed to reduce damage to the ground ・Compatible with wheel sizes up to 700C ・Suitable for city bikes, shopping bikes, touring bikes, and rack-equipped bicycles 【SPEC】 ・Brand: BLUE LUG ・Model: double leg kickstand ・Material: Aluminum ・Compatible Wheel Size: Up to 700C ・Colors: Black / Silver ・Included: Mounting bolts ・Frame Compatibility: Frames with a dedicated kickstand mounting plate 【NOTES】 ・This kickstand is designed for frames with a dedicated kickstand mounting plate. ・Check clearance around the frame, tires, crankset, cables, and other components before installation. ・Stability under load will vary depending on the weight and position of the cargo and the condition of the ground. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/_blue-lug_double-leg-kickstand

【NITTO × BLUE LUG】M-1B Front Rack | Compact Support with Long Stays and Five-Point Mounting A compact BLUE LUG special edition rack designed to support bags and baskets in a low, stable position. The 【NITTO × BLUE LUG】M-1B Front Rack is based on NITTO’s compact M-1 rack and modified with longer stays for greater mounting flexibility. Its 30cm stays make it easier to accommodate frames with mounting eyelets positioned lower on the fork blades. The rack is secured at five points: one central mount and two mounts on each side. This structure provides stable support for large handlebar bags, saddle bags, and baskets while maintaining a compact profile. It can also help keep a front bag away from the tire. M5 eyelets on both sides of the platform allow a dynamo light or lamp holder to be attached. Although designed as a front rack, it can also be used at the rear when the bicycle’s mounting points and clearances are compatible. Slim chromoly tubing and carefully finished welds give the rack the clean appearance associated with NITTO. Its compact dimensions suit touring bikes, randonneur-style builds, gravel bikes, and commuters without overwhelming the bicycle’s silhouette. 【FEATURES】 ・BLUE LUG special edition based on NITTO’s compact M-1 rack ・30cm long stays designed to accommodate lower fork eyelet positions ・Five-point mounting structure with one central and four side mounting points ・Suitable for supporting handlebar bags, saddle bags, and baskets ・M5 eyelets on both sides of the platform for a light or lamp holder ・Can also be used as a rear rack when mounting points and clearances are compatible ・Compact dimensions that maintain a clean bicycle silhouette ・Made in Japan from slim chromoly tubing 【SPEC】 ・Brand: NITTO ・Model: M-1B Front Rack ・Dimensions: 20cm long × 11cm wide × 12cm high ・Stay Length: 30cm ・Maximum Load: 8kg ・Material: Chromoly ・Colors: Silver / Black ・Included: Mounting bands in three sizes for different fork diameters ・Country of Origin: Japan ・Edition: BLUE LUG Special Edition 【NOTES】 ・Check the bicycle’s mounting eyelets and clearance around the fork, tire, brakes, and other components before installation. ・Clamp marks or minor surface scratches may be present on the legs due to the manufacturing process. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-blue-lug-m-1b-front-rack?variant=48047986278675

【NITTO × BLUE LUG】M-1B Front Rack | Compact Support with Long Stays and Five-Point Mounting A compact BLUE LUG special edition rack designed to support bags and baskets in a low, stable position. The 【NITTO × BLUE LUG】M-1B Front Rack is based on NITTO’s compact M-1 rack and modified with longer stays for greater mounting flexibility. Its 30cm stays make it easier to accommodate frames with mounting eyelets positioned lower on the fork blades. The rack is secured at five points: one central mount and two mounts on each side. This structure provides stable support for large handlebar bags, saddle bags, and baskets while maintaining a compact profile. It can also help keep a front bag away from the tire. M5 eyelets on both sides of the platform allow a dynamo light or lamp holder to be attached. Although designed as a front rack, it can also be used at the rear when the bicycle’s mounting points and clearances are compatible. Slim chromoly tubing and carefully finished welds give the rack the clean appearance associated with NITTO. Its compact dimensions suit touring bikes, randonneur-style builds, gravel bikes, and commuters without overwhelming the bicycle’s silhouette. 【FEATURES】 ・BLUE LUG special edition based on NITTO’s compact M-1 rack ・30cm long stays designed to accommodate lower fork eyelet positions ・Five-point mounting structure with one central and four side mounting points ・Suitable for supporting handlebar bags, saddle bags, and baskets ・M5 eyelets on both sides of the platform for a light or lamp holder ・Can also be used as a rear rack when mounting points and clearances are compatible ・Compact dimensions that maintain a clean bicycle silhouette ・Made in Japan from slim chromoly tubing 【SPEC】 ・Brand: NITTO ・Model: M-1B Front Rack ・Dimensions: 20cm long × 11cm wide × 12cm high ・Stay Length: 30cm ・Maximum Load: 8kg ・Material: Chromoly ・Colors: Silver / Black ・Included: Mounting bands in three sizes for different fork diameters ・Country of Origin: Japan ・Edition: BLUE LUG Special Edition 【NOTES】 ・Check the bicycle’s mounting eyelets and clearance around the fork, tire, brakes, and other components before installation. ・Clamp marks or minor surface scratches may be present on the legs due to the manufacturing process. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-blue-lug-m-1b-front-rack?variant=48047986278675

E.B.S Beak Bag Supporter (RAW) | A Minimal Kyoto-Made Support for a Stable Bag Setup Designed not to carry luggage directly, but to keep handlebar and saddle bags stable, properly positioned, and clear of the bike. The E.B.S Beak Bag Supporter is designed to support the position of a handlebar or saddle bag, helping reduce movement and contact with the tire or frame while riding. Unlike a cargo rack, it is not intended to carry the weight of luggage on its own. It supports the underside of the bag to help maintain its shape and position during bikepacking, touring, commuting, and everyday rides. Its minimal construction blends naturally into the bicycle without disrupting the overall silhouette. Dedicated front and rear versions are available, each designed for a specific mounting position and diameter. The supporter is manufactured at the E.B.S workshop in Kyoto, Japan. Its matte RAW finish retains the character of the material and develops a changing appearance through regular use. The weight of the bag must be supported by the handlebar, saddle rails, or another suitable mounting point. The Beak Bag Supporter should only be used to stabilize the bag and help prevent unwanted contact. 【FEATURES】 ・Helps stabilize handlebar and saddle bags ・Reduces unwanted contact with the tire or frame ・Designed to support bag position rather than carry luggage directly ・Minimal shape that blends naturally with the bicycle ・Dedicated front and rear designs ・Manufactured at the E.B.S workshop in Kyoto ・Matte RAW finish with a changing appearance over time ・Suitable for touring and bikepacking bag setups 【SPEC】 ・Brand: E.B.S ・Model: Beak Bag Supporter ・Front Compatibility: Oversized column, 31.8mm outer diameter ・Front Stack Height: 20mm ・Rear Compatibility: 27.2mm seatpost ・Rear Stack Height: 20mm ・Color: Matte RAW ・Country of Origin: Japan (Kyoto) 【IMPORTANT NOTES】 ・This product is a bag support and is not designed to carry the full weight of luggage. ・The weight of the bag must be supported by the handlebar, saddle rails, or another suitable mounting point. ・When placing luggage directly on the supporter, secure it to the handlebar or saddle rails with straps. ・The matte RAW finish has an anti-rust treatment beneath the matte clear coat, but rust may still develop under the clear coat due to the nature of the finish. ・Paint damage caused by contact with the bag may expose the surface and lead to rust. ・For front installation, route brake and shift cables carefully to prevent interference while riding. ・Do not install on a carbon steerer or carbon seatpost. ・Check the inner mounting surface for burrs before installation. ・When installing the rear version, do not twist it into position or force it onto the seatpost. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/e-b-s-beak-bag-supporter

Pepcycles Cafe Rack | A Front Rack Designed to Carry Your Coffee Take your favorite cup wherever you want to go. The Pepcycles Cafe Rack is a unique front bicycle rack featuring a dedicated cup holder for carrying takeaway coffee. A cup of coffee from a convenience store or local caf? can be difficult to carry safely while riding. It cannot easily be placed inside a bag, and holding it while steering is not a practical option. The Cafe Rack offers a simple solution by integrating a cup holder directly into the rack platform. Its 300 × 210mm platform also provides useful space for carrying bags, shopping items, and other everyday essentials. With a maximum load capacity of 10kg, it is suitable for commuting, urban riding, shopping, and relaxed weekend rides. It can also be used as a support platform for a front bag. Made from lightweight aluminum, the Cafe Rack combines a playful idea with the practical function of a reliable front rack. Carry your morning coffee to the office, take it to the park for a relaxing break, or simply make everyday journeys a little more enjoyable. More than just a way to carry luggage, the Cafe Rack introduces a new way to enjoy daily life by bicycle. 【FEATURES】 ・Integrated holder designed for carrying takeaway coffee cups ・300 × 210mm platform for bags and everyday luggage ・Maximum load capacity of 10kg ・Lightweight aluminum construction ・Can be used as a support platform for a front bag ・Ideal for commuting, urban riding, shopping, and casual rides ・Simple and distinctive design for everyday bicycles ・Compatible with bicycles equipped with a fork crown hole and rack mounting eyelets 【SPEC】 Size: 300 × 210mm Color: BLACK Material: Aluminum Weight: Approx. 690g, including mounting hardware Maximum Load: 10kg Compatibility: Bicycles equipped with a fork crown hole and rack mounting eyelets 【PLEASE CHECK BEFORE ORDERING】 Compatibility may vary depending on the shape of the bicycle frame and fork, as well as the position of the mounting eyelets. Before ordering, please check the mounting points and confirm that the rack will not interfere with the brakes, fork, tire, or other components. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/pepcycles-caferack