OCEAN AIR CYCLES × NITTO erlen saddle bag support 2.0 | Clean Support for Larger Saddle Bags A streamlined saddle bag support developed by OCEAN AIR CYCLES and made in Japan by NITTO. The erlen saddle bag support 2.0 is designed to support the bottom of larger saddle bags, helping reduce sagging and movement when carrying gear. Unlike conventional supports that clamp around the seatpost or seat tube, it mounts at the saddle clamp area. This distinctive design keeps the area around the seatpost clean while providing a stable platform beneath the bag. Made from stainless steel and manufactured in Japan by NITTO, the support is designed around NITTO S65, S83, and S92 seatposts. The support measures approximately 17cm deep and 18.5cm wide, with a maximum load capacity of approximately 6.8kg. For trail riding, a load of 4.5kg or less is recommended. It works well for touring setups carrying clothing or rain gear, as well as everyday commuter bikes equipped with a larger saddle bag. Features ・Original saddle bag support design by OCEAN AIR CYCLES ・Mounts at the saddle clamp area ・Supports the bottom of a saddle bag to help reduce sagging and movement ・Stainless steel construction ・Designed around NITTO S65, S83, and S92 seatposts ・Maximum load capacity of approximately 6.8kg ・Made in Japan by NITTO ・Includes dedicated mounting bolts SPEC ・Material: Stainless Steel ・Rail Width: 44mm ・Size: Approx. 17cm deep × 18.5cm wide ・Maximum Load: Approx. 6.8kg ・Recommended Maximum Load for Trail Riding: 4.5kg ・Compatibility: Designed around NITTO S65, S83, and S92 seatposts ・Included: Dedicated mounting bolts ・Color: SILVER ・Made in Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/ocean-air-cycles-nitto-erlen-saddle-bag-support-2-0

NITTO SYNC BAR XL | Wide Riser Bar Built for Trail Riding An 800mm-wide NITTO handlebar developed with BLUE LUG for trail riding, bike parks, and playful flat-bar builds. The NITTO SYNC BAR XL is a custom handlebar developed from feedback by members of BLUE LUG's “Monthly Mountain Cycling Club.” Its shape was created with trail riding, bike parks, jumps, and other active riding styles in mind. The 800mm width and 50mm rise provide a relatively high cockpit position suited to modern mountain bikes. A pronounced upward bend is combined with up to 19° of backsweep, giving the bar its distinctive shape. Compared with a typical low, flat MTB bar, it positions the grips higher and closer to the rider. While designed with mountain biking in mind, the SYNC BAR XL can also be used on fixed-gear bikes and flat-bar gravel builds when you want to give the bike a more playful setup. With its full 800mm width, the bar also gives you room to first test the position and handling before deciding how it best fits your bike and riding style. Features ・Custom NITTO model developed from feedback by BLUE LUG's “Monthly Mountain Cycling Club” ・Wide 800mm handlebar ・50mm rise for a relatively high cockpit position ・Up to 19° backsweep ・Distinctive shape with a pronounced upward bend ・Suitable for MTB, fixed-gear, and flat-bar gravel builds ・Made in Japan SPEC ・Material: Aluminum ・Width: 800mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 17mm ・Rise: 50mm ・Backsweep: Up to 19° ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar-xl

NITTO SYNC BAR XL | Wide Riser Bar Built for Trail Riding An 800mm-wide NITTO handlebar developed with BLUE LUG for trail riding, bike parks, and playful flat-bar builds. The NITTO SYNC BAR XL is a custom handlebar developed from feedback by members of BLUE LUG's “Monthly Mountain Cycling Club.” Its shape was created with trail riding, bike parks, jumps, and other active riding styles in mind. The 800mm width and 50mm rise provide a relatively high cockpit position suited to modern mountain bikes. A pronounced upward bend is combined with up to 19° of backsweep, giving the bar its distinctive shape. Compared with a typical low, flat MTB bar, it positions the grips higher and closer to the rider. While designed with mountain biking in mind, the SYNC BAR XL can also be used on fixed-gear bikes and flat-bar gravel builds when you want to give the bike a more playful setup. With its full 800mm width, the bar also gives you room to first test the position and handling before deciding how it best fits your bike and riding style. Features ・Custom NITTO model developed from feedback by BLUE LUG's “Monthly Mountain Cycling Club” ・Wide 800mm handlebar ・50mm rise for a relatively high cockpit position ・Up to 19° backsweep ・Distinctive shape with a pronounced upward bend ・Suitable for MTB, fixed-gear, and flat-bar gravel builds ・Made in Japan SPEC ・Material: Aluminum ・Width: 800mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 17mm ・Rise: 50mm ・Backsweep: Up to 19° ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar-xl

NITTO cr-mo spacer (1-1/8) | Slim Chromoly Steerer Spacer A slim Chromoly spacer designed for a clean, well-matched finish around the stem. When you need to make a small adjustment to handlebar height after changing a stem or handlebar, a few millimeters can make a difference. The NITTO cr-mo spacer uses tubing with the same outer diameter as NITTO threadless stems. When combined, the matching diameter helps create a clean transition between the stem and spacers. Its thin-wall Chromoly construction gives the cockpit a slimmer appearance compared with typical aluminum spacers. Available in 3mm, 5mm, and 10mm heights, it is suitable for fine position adjustments or for creating a cleaner-looking steerer setup, particularly when paired with a NITTO threadless stem. Features ・Uses tubing with the same outer diameter as NITTO threadless stems ・Designed to create a clean transition between the stem and spacers ・Slim Chromoly construction ・Available in 3mm, 5mm, and 10mm heights ・Compatible with 1-1/8-inch steerer tubes ・Made in Japan SPEC ・Steerer Diameter: 1-1/8" ・Material: Chromoly ・Outer Diameter: 31.8mm ・Height: 3mm / 5mm / 10mm ・Color: Black / Chrome / Dull ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-cr-mo-spacer-1-1-8

SimWorks by NITTO Burrito Rack | A Compact Rear Rack Designed for Rolled Gear A lightweight rear rack made for carrying rolled jackets, sleeping bags, and other compact gear without overwhelming the look of your bike. As its name suggests, the SimWorks by NITTO Burrito Rack is designed to carry gear rolled into a burrito-like shape. Its gently curved platform helps hold rolled windbreakers, shirts, bike travel bags, sleeping bags, and blankets in place. Secure the load with straps or a cargo net for simple, practical carrying on daily rides and longer trips. The compact design adds carrying capacity without the visual weight of a large touring rack. It can also support a small rear bag, making it suitable for commuter bikes, touring bikes, gravel bikes, and old-school MTB builds. Made by NITTO from slender chromoly tubing, the rack has a clean appearance that complements the bike even when nothing is loaded. It can be installed on frames with rack eyelets. The included clip bands also allow installation on seatstays without eyelets. Studs beneath the rack provide additional attachment points for straps or a cargo net. 【STAFF REVIEW】 At first glance, you may wonder what such a small rack can carry, but its carefully considered size becomes clear once you start using it. It provides enough space for a windbreaker, shirt, bike travel bag, or compact sleeping bag without making the bike look as heavy as it might with a full-size rack. The slender chromoly tubing works especially well with commuter bikes and old-school MTB builds. It is a practical option for riders who occasionally need to carry a small amount of extra gear. 【FEATURES】 ・Designed for carrying rolled jackets, sleeping bags, and other compact gear ・Gently curved platform helps rolled items sit securely ・Can be used as support for a compact rear bag ・Slender construction made from 9mm chromoly steel tubing ・Compatible with frames equipped with rack eyelets ・Included clip bands allow installation on seatstays without eyelets ・Lower studs can be used as attachment points for straps or a cargo net ・Suitable for commuter, touring, gravel, and old-school MTB builds 【SPEC】 ・Product Name: SimWorks by NITTO Burrito Rack ・Material: 9mm CrMo Steel Tube ・Colors: Chrome, Black ・Weight: Approx. 325g, excluding Connection Rods ・Maximum Load: 10kg ・Compatible Seatpost Diameter: 26.8-27.2mm ・Required Clearance: At least 120mm between the top of the rear tire and the clamp position ・Included: Connection Rod 210mm × 2 ・Included: Connection Rod 350mm × 2 ・Included: Clip Band 22mm × 2 ・Included: Rubber Band for Seat Post × 1 ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-by-nitto-burrito-rack

MKS CT-LITE | Versatile Flat Pedals for City Riding and Touring An easy-to-use double-sided platform for everyday sneakers, making it a practical choice for a first sports bike or pedal replacement. The MKS CT-LITE is a straightforward flat pedal designed for a wide range of riding, from everyday city use to longer touring rides. Its lightweight one-piece aluminum body has a double-sided platform, allowing you to step onto either side without adjusting the pedal position. This makes it particularly convenient for urban riding with frequent stops and starts. The W93 × L66mm platform provides stable support when used with everyday sneakers. Ball bearings deliver smooth rotation for commuting, recreational rides, and touring. The CT-LITE is also compatible with toe clips and optional reflectors, allowing the setup to be adjusted according to your riding style and intended use. With its simple appearance and accessible design, it pairs naturally with road bikes, cross bikes, and everyday commuter builds. It is a practical Japanese-made option for riders choosing their first replacement pedals. 【STAFF REVIEW】 The broad platform provides stable support when riding in sneakers, making the CT-LITE easy to recommend for riders who are new to sports bikes. Because both sides can be used, there is little need to check the pedal position when starting from a traffic light. It is a straightforward choice for riders who mainly ride in the city but also enjoy occasional touring. 【FEATURES】 ・Lightweight one-piece aluminum body ・Double-sided platform for easy step-on use ・Stable W93 × L66mm platform ・Ball bearings for smooth rotation ・Designed for use with everyday sneakers ・Compatible with toe clips ・Compatible with optional reflectors ・Suitable for road, touring, and urban riding 【SPEC】 ・Brand: MKS ・Model: CT-LITE ・Color: Silver, Black ・Body: Aluminum ・Size: W93 × L66mm ・Platform: Double-sided ・Bearing: Ball bearing ・Toe Clip Compatibility: Compatible ・Reflector Compatibility: Compatible ・Recommended Use: Road, touring, urban riding ・Weight: 343g ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/_mks_ct-lite

MKS IC-LITE | Reflector-Equipped Flat Pedals for Everyday Riding A practical double-sided pedal with integrated reflectors, designed for commuting, city riding, and touring. The MKS IC-LITE is a flat pedal based on the popular CT-LITE, with reflectors fitted as standard for added visibility in low-light conditions. Its lightweight one-piece aluminum body and double-sided platform make it easy to step on and ride without adjusting the pedal position. The straightforward platform works well with everyday sneakers, particularly during urban rides with frequent stops and starts. The integrated reflectors help make the rider more visible when traveling at night or during darker hours. Its simple design pairs naturally with cross bikes, city bikes, and everyday commuter builds. Ball bearings provide smooth rotation for daily transportation and longer rides. Combining an easy-to-use platform with practical reflectors, the IC-LITE is suitable for commuting, city riding, and touring. 【STAFF REVIEW】 The IC-LITE retains the accessible design of the CT-LITE while adding reflectors for greater visibility during low-light rides. Its lightweight, easy-to-step-on platform works naturally with everyday sneakers, making it a practical option for a first pedal replacement. It is particularly useful for commuting or riding at times when daylight may be limited. 【FEATURES】 ・Based on the popular MKS CT-LITE ・Reflectors fitted for added low-light visibility ・Lightweight one-piece aluminum body ・Practical double-sided platform ・Ball bearings for smooth rotation ・Easy to use with everyday sneakers ・Suitable for commuting, city riding, and touring ・Simple design for cross bikes, city bikes, and commuters 【SPEC】 ・Brand: MKS ・Model: IC-LITE ・Color: Silver, Black ・Body: Aluminum ・Size: W93 × L67mm ・Platform: Double-sided ・Bearing: Ball bearing ・Toe Clip Compatibility: Not compatible ・Reflectors: Included ・Recommended Use: Touring, urban riding ・Weight: 365g ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/_mks_ic-lite

【SimWorks by NITTO】Fun 3 Bar | An ATB Handlebar for a More Relaxed Riding Position A distinctive handlebar designed to bring more freedom to the way you ride. The SimWorks by NITTO Fun 3 Bar is an ATB handlebar with 35 degrees of backsweep and 20mm of rise. Designed for riders who prefer a less restrictive setup, it works across everything from relaxed city cruising to forest road touring. The generous backsweep places the wrists and shoulders in a more natural position. Combined with the 20mm rise, it helps create a relaxed riding posture with a slightly more upright upper body. Its original concept began with tubing intended for motorcycles and has since evolved into a handlebar with a modern 31.8mm clamp diameter. Manufactured by NITTO in Japan, it is made from heat-treated aluminum alloy. The Fun 3 Bar is available in 680mm and 750mm widths. Its distinctive shape can be used with single-speed bikes, ATBs, gravel bikes, touring bikes, and commuters. 【STAFF REVIEW】 While the 35-degree backsweep may look dramatic on paper, the grip position feels surprisingly natural. It allows the wrists and shoulders to settle into a relaxed position and can make a noticeable change to the overall feel of the bike. The 680mm version suits riders looking for a more compact setup, while the 750mm option offers a wider stance and additional steering leverage. 【FEATURES】 ・35-degree backsweep for a natural wrist position ・20mm rise for a more relaxed riding posture ・Available in 680mm and 750mm widths ・31.8mm clamp diameter for modern bike setups ・Heat-treated NITTO aluminum alloy construction ・Suitable for city riding, touring, ATBs, and gravel bikes ・Distinctive shape with responsive handling ・Made in Japan 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Fun 3 Bar ・Material: Heat-Treated Aluminum Alloy ・Clamp Diameter: 31.8mm ・Width: 680mm / 750mm ・Rise: 20mm ・Grip Angle: 35 degrees ・Weight: 359g（680mm）/ 393g（750mm） ・Color: Silver / Black ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/sim-works-by-nitto-fun-3-bar

【SimWorks by NITTO】RAMBLE BAR | An Adventure Bar Made for Taking the Long Way Load up a large front bag, follow an interesting road, and enjoy the detour. The RAMBLE BAR supports a relaxed and flexible approach to riding. Developed through a collaboration between SimWorks and Golden Pliers, a bicycle shop in Portland, Oregon, the RAMBLE BAR was created for rides that are not defined solely by the destination. Its most distinctive features are the generous 65° backsweep and unique shape designed with large front bags in mind. The bar provides space for carrying a bag while helping create a natural and comfortable hand position. With a total width of 710mm, it offers stable handling for city riding, touring, and bikepacking. The 160mm grip and control zone also provides room to adjust hand placement during longer rides. The bar can be installed in its standard rise position or flipped to create a negative-drop setup. This allows the riding position and appearance to be adjusted according to the bike, intended use, and personal preference. Made from heat-treated aluminum and manufactured by NITTO, the RAMBLE BAR combines the playful design approach of SimWorks with practical features for carrying gear and exploring beyond familiar routes. 【FEATURES】 ・Developed through a collaboration between Golden Pliers and SimWorks ・65° backsweep for a natural hand position ・Shape designed with large front bags in mind ・710mm width for stable handling ・160mm grip and control zone for varied hand placement ・Can be installed in a standard rise or flipped negative-drop position ・Suitable for city riding, touring, and bikepacking ・Heat-treated aluminum construction ・Manufactured by NITTO 【SPEC】 ・Brand: SimWorks by NITTO ・Model: RAMBLE BAR ・Material: Heat Treated Aluminum ・Clamp Diameter: 31.8mm ・Handlebar Diameter: 22.2mm ・Width: 710mm, center to center at bar ends ・Backsweep: 65° ・Depth: 154mm ・Rise / Drop: 30mm ・Grip / Control Zone: 160mm ・Weight: 460g ・Color: Silver / Black ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-by-nitto-ramble-bar

【SimWorks by NITTO】Cowcow Bar | A High-Rise Handlebar for Comfort and Control An 80mm rise and 750mm width create a relaxed riding position with stable handling. Whether you are enjoying the scenery at an easy pace or taking a detour onto a dirt road, the SimWorks by NITTO Cowcow Bar supports a wide range of riding styles. Its 80mm rise is combined with a 12° backsweep and 5° upsweep, making it easier to create a more upright riding position. The shape helps the hands and wrists settle naturally for comfortable control on everyday rides and longer outings. The 750mm width provides stable steering and useful leverage on unpaved roads. It is suitable for MTBs and ATBs, as well as gravel bikes and commuter builds that benefit from a higher, wider handlebar position. Made from heat-treated aluminum, the Cowcow Bar is manufactured in Japan by NITTO and undergoes repeated strength testing. It is a practical choice for riders seeking a generous rise and confident handling. 【FEATURES】 ・Manufactured in Japan by NITTO ・80mm rise for a more upright riding position ・750mm width for stable steering and control ・12° backsweep for a natural wrist angle ・5° upsweep for a comfortable hand position ・Heat-treated aluminum construction ・Suitable for MTB, ATB, gravel, and commuter bikes ・Available in Silver and Black 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Cowcow Bar ・Material: Heat Treated Aluminum ・Handlebar Width: 750mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Rise: 80mm ・Backsweep: 12° ・Upsweep: 5° ・Weight: Approx. 380g ・Color: Silver / Black ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/sim-works-by-nitto-cowcow-bar

【SimWorks by NITTO】Calsaga Bar | A Touring Bullhorn Bar with Multiple Hand Positions The stability of a flat bar, combined with the comfort and versatility of bar ends. The Calsaga Bar is a CrMo steel touring bullhorn handlebar developed by SimWorks by NITTO for riders who want one bar that works well for both everyday riding and longer journeys. Its central section provides the natural and stable feel of a flat handlebar, while the forward extensions offer additional hand positions. The main section supports a relaxed position while cruising, and the ends provide a secure place to grip during climbs, acceleration, or out-of-saddle riding. A subtle sweep and rise help create a natural steering position, while the 600mm width provides stable handling. Being able to change hand positions also makes it well suited to touring and gravel rides where comfort over longer distances is important. Made from CrMo steel by NITTO in Japan, the Calsaga Bar combines a responsive, slightly flexible feel with the clean construction and finish associated with NITTO handlebars. It is a versatile option for touring bikes, gravel bikes, and commuters that require stable handling and a wider range of riding positions. 【FEATURES】 ・Bullhorn shape combining the benefits of a flat bar and bar ends ・Multiple hand positions for cruising, climbing, and out-of-saddle riding ・CrMo steel construction ・Subtle sweep and rise for a natural riding position ・600mm width for stable handling ・Suitable for touring, gravel riding, and commuting ・Manufactured by NITTO in Japan ・Dullbright finish 【SPEC】 ・Material: CrMo Steel ・Handlebar Width: 600mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 19.0mm ・Color: Dullbright ・Manufacturer: NITTO ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/_sim-works_by_nitto_calsaga-bar

【SimWorks by NITTO】Mowmow Bar | A Wide Aluminum Riser Bar for Versatile Builds A 750mm-wide riser bar with balanced rise and sweep angles for MTB, ATB, gravel, and everyday bike setups. The Mowmow Bar is a Japan-made aluminum riser bar manufactured by NITTO for SimWorks. Its 750mm width is combined with a 38mm rise, 9-degree backsweep, and 5-degree upsweep. This geometry provides a stable platform while placing the grips at a natural angle. Made from heat-treated aluminum, the bar can be used for a wide range of builds, including MTBs, ATBs, gravel bikes, and commuters. It features a 31.8mm stem clamp diameter and a 22.2mm grip diameter. Silver and Black finishes are available to suit different bike styles. 【FEATURES】 ・Aluminum riser bar manufactured by NITTO for SimWorks ・750mm width for stable handling ・38mm rise for a natural riding position ・9-degree backsweep and 5-degree upsweep ・Made from heat-treated aluminum ・Suitable for MTB, ATB, gravel, and commuter builds ・31.8mm clamp diameter and 22.2mm grip diameter ・Available in Silver and Black ・Made in Japan 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Mowmow Bar ・Material: Heat-Treated Aluminum ・Width: 750mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Rise: 38mm ・Backsweep: 9° ・Upsweep: 5° ・Colors: Silver / Black ・Country of Origin: Japan 【NOTES】 ・Before installation, confirm compatibility with the stem, brake levers, shifters, and grips. ・Make sure the brake and shift cables are long enough for the new handlebar position. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/sim-works-by-nitto-mowmow-bar-31-8

【SimWorks by NITTO】Little Nick Bar | A Modern Aluminum Flat Bar with a 15-Degree Sweep A clean zero-rise profile and natural backsweep make this Japan-made handlebar easy to incorporate into a wide range of bike builds. The Little Nick Bar is an aluminum flat handlebar manufactured by NITTO for SimWorks. Its 750mm width and zero-rise profile are combined with a 15-degree grip angle that brings the grips naturally toward the rider. The versatile shape works well for city riding, gravel routes, touring, and other custom setups. Made from heat-treated aluminum, the bar features a 31.8mm clamp diameter and a 22.2mm grip diameter for compatibility with modern components. Its clean silhouette also complements slim steel frames and bikes with a classic appearance. Carefully bent and finished in Japan by NITTO, the Little Nick Bar combines modern dimensions with an understated design. 【FEATURES】 ・Aluminum flat handlebar manufactured by NITTO for SimWorks ・15-degree grip angle for a natural hand position ・Clean zero-rise profile ・750mm width for stable handling ・Made from heat-treated aluminum ・31.8mm clamp diameter and 22.2mm grip diameter ・Suitable for city riding, gravel routes, and touring ・Made in Japan by NITTO 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Little Nick Bar ・Material: Heat-Treated Aluminum ・Colors: Silver / Black ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Width: 750mm ・Rise: 0mm ・Grip Angle: 15° ・Weight: Approx. 380g ・Country of Origin: Japan 【NOTES】 ・Before installation, confirm compatibility with the stem, brake levers, shifters, and grips. ・Make sure the brake and shift cables are long enough for the new handlebar position. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-by-nitto-little-nick-bar

【SimWorks by NITTO】Fun 3 CrMo Bar | A Versatile ATB Handlebar with Multiple Hand Positions From city riding to gravel routes and touring, its distinctive three-dimensional bends provide a range of natural hand positions. The Fun 3 CrMo Bar is a chromoly ATB handlebar manufactured by NITTO for SimWorks. Its 680mm width is combined with a 25mm rise and 35-degree grip angle. The grips sweep naturally toward the rider, making the bar suitable for commuters, ATBs, gravel bikes, touring bikes, and other custom builds. Its defining feature is a complex three-dimensional shape created by bending the bar upward twice and back once. This design offers multiple areas to hold, allowing the rider to adjust hand position according to the route and riding situation. Made from Chromoly Steel, the bar combines a slim profile with the flexible feel associated with the material. The Fun 3 CrMo Bar is an adaptable option for riders building a distinctive ATB, commuter, or touring setup. 【FEATURES】 ・Chromoly ATB handlebar manufactured by NITTO for SimWorks ・680mm width for stable handling ・25mm rise and 35-degree grip angle ・Distinctive three-dimensional bends ・Multiple hand positions for different riding situations ・Flexible feel associated with chromoly steel ・Suitable for city riding, gravel routes, and touring ・Available in Dullbright and Black 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Fun 3 CrMo Bar ・Material: Chromoly Steel ・Width: 680mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Rise: 25mm ・Grip Angle: 35° ・Colors: Dullbright / Black 【NOTES】 ・Before installation, confirm compatibility with the stem, brake levers, shifters, and grips. ・Make sure the brake and shift cables are long enough for the handlebar shape. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-fun-3-crmo-bar

【SimWorks by NITTO】Mowmow CrMo Bar | A Versatile Chromoly Riser Bar With a balanced 38mm rise, the Mowmow creates a natural riding position for city rides, touring, and all-terrain builds. The Mowmow CrMo Bar is a Japan-made chromoly riser bar produced by NITTO for SimWorks. Its 700mm width is combined with a 38mm rise, 9-degree backsweep, and 5-degree upsweep. This balanced shape helps create a natural hand position and works with commuters, touring bikes, ATBs, gravel bikes, and other custom builds. Made from Chromoly Steel, the bar combines a slim, classic profile with the flexible feel associated with the material. The width can be trimmed to suit the rider and bike configuration. A custom decal kit is included for adjusting the final appearance to match the build. Carefully bent and finished by NITTO, the Mowmow is a versatile riser bar designed for a wide range of everyday and recreational riding styles. 【FEATURES】 ・Chromoly riser bar produced by NITTO for SimWorks ・Balanced 38mm rise ・9-degree backsweep and 5-degree upsweep ・700mm width ・Can be trimmed to suit the rider and bike setup ・Flexible feel associated with chromoly steel ・Suitable for commuters, touring bikes, and ATBs ・Includes a custom decal kit 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Mowmow CrMo Bar ・Material: Chromoly Steel ・Width: 700mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Rise: 38mm ・Backsweep: 9° ・Upsweep: 5° ・Colors: Dullbright / Chrome Plated / Black ・Included: Custom Decal Kit 【NOTES】 ・Before installation, confirm compatibility with the stem, brake levers, shifters, and grips. ・Before trimming the handlebar, make sure sufficient space remains for all control components. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/sim-works-by-nitto-mowmow-crmo-bar

【SimWorks by NITTO】Little Nick CrMo Bar | A Versatile Chromoly Handlebar for Custom Builds Choose your preferred grip position and bar width. Its simple shape provides a flexible starting point for a wide range of bike setups. The Little Nick CrMo Bar is a chromoly flat handlebar produced by NITTO for SimWorks. Its 700mm width and zero-rise profile are combined with a 15-degree backsweep, creating a natural hand position. The versatile shape works well with ATBs, commuters, touring bikes, and other custom builds. The wide bar can also be trimmed to suit the rider’s preference and bike configuration. Made from chromoly steel, it offers the distinctive flexibility and feel associated with the material. Careful bending and finishing by NITTO give the Little Nick a clean, refined appearance. It is a straightforward and adaptable handlebar for riders who want the freedom to create their own setup. 【FEATURES】 ・Chromoly handlebar produced by NITTO for SimWorks ・15-degree backsweep for a natural hand position ・Wide 700mm design ・Can be trimmed to suit the rider and bike setup ・Zero-rise profile ・Flexible feel associated with chromoly steel ・Suitable for ATBs, commuters, and touring bikes ・Carefully bent and finished by NITTO 【SPEC】 ・Brand: SimWorks by NITTO ・Model: Little Nick CrMo Bar ・Material: Chromoly Steel ・Width: 700mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Rise: 0mm ・Sweep: 15° ・Colors: Dullbright / Chrome Plated / Black 【NOTES】 ・Before installation, confirm compatibility with the stem, brake levers, shifters, and grips. ・Before trimming the handlebar, make sure sufficient space remains for all control components. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/sim-works-by-nitto-little-nick-crmo-bar

【SimWorks by NITTO】Getaround CrMo Bar | A Versatile Steel Handlebar with a Natural Riding Position From everyday city rides to detours along unpaved roads, this classic SimWorks handlebar creates a relaxed and natural riding position. The Getaround CrMo Bar is a Japan-made chromoly handlebar produced by NITTO for SimWorks. Its 700mm width is combined with a 10mm rise and 20-degree backsweep. The grip sections angle naturally toward the rider, helping create a comfortable hand position for relaxed riding. Made from CrMo steel, the bar can be used on a range of builds, including commuters, single-speed bikes, gravel bikes, and other bicycles intended for both paved and unpaved routes. The bar has a 25.4mm stem clamp diameter and a 22.2mm grip diameter. A custom decal kit is included, allowing the appearance to be adjusted to suit your bike. 【FEATURES】 ・Classic CrMo handlebar from SimWorks ・700mm width for stable handling ・10mm rise and 20-degree backsweep ・Shape designed to create a natural hand position ・Suitable for city riding and gravel routes ・25.4mm stem clamp diameter ・22.2mm grip diameter ・Manufactured in Japan by NITTO ・Includes a custom decal kit 【SPEC】 ・Material: CrMo Steel ・Width: 700mm ・Rise: 10mm ・Sweep: 20° ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Country of Origin: Japan ・Included: Custom Decal Kit 【NOTES】 ・Before installation, confirm that the stem clamp diameter and the diameters of the brake levers, shifters, and grips are compatible. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/simworks-by-nitto-getaround-crmo-bar

FAIRWEATHER b923 bullmoose bar（wide）｜Classic Bullmoose Styling for Modern Builds A wide bullmoose handlebar that carries the character of old-school mountain bikes into a more contemporary riding position. The FAIRWEATHER b923 bullmoose bar（wide）is an updated version of the long-running B903 bullmoose bar, with revised width and hand positioning for modern bike builds. Its distinctive integrated bullmoose silhouette remains, while the handlebar has been widened to 750mm. The bar ends are raised by 10mm and paired with approximately 15° of backsweep, creating a position that allows the wrists to rest at a natural angle. The geometry is based on the combination of a 100mm NITTO UI-2 stem and 15° sweep. With a 135mm extension, it balances the classic appearance of an old-school MTB cockpit with proportions suited to contemporary riding styles. Made from chromoly by experienced NITTO craftspeople in Japan, the bar features smooth fillet finishing around the steerer junction. Its distinctive shape works well with mountain bikes, commuters, touring bikes, and track bike builds where a classic look is desired. 【FEATURES】 ・Wide version based on the FAIRWEATHER B903 ・750mm handlebar width ・Bar ends raised by 10mm ・Approximately 15° backsweep ・Geometry based on a 100mm NITTO UI-2 stem ・Classic integrated bullmoose construction ・Fillet-finished steerer junction ・Chromoly construction ・Made in Japan by NITTO ・Suitable for MTB, commuter, touring, and track bike builds 【SPEC】 ・Handlebar Width: 750mm ・Backsweep: Approx. 15° ・Bar Clamp Diameter: 22.2mm ・Steerer Diameter: 1-1/8 inch, oversized ・Steerer Stack Height: 40mm ・Extension: 135mm, equivalent to a 100mm UI-2 stem ・Material: Chromoly ・Color: DULL, BLACK ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/fairweather-b923-bullmoose-bar

FAIRWEATHER b923 bullmoose bar（wide）｜Classic Bullmoose Styling for Modern Builds A wide bullmoose handlebar that carries the character of old-school mountain bikes into a more contemporary riding position. The FAIRWEATHER b923 bullmoose bar（wide）is an updated version of the long-running B903 bullmoose bar, with revised width and hand positioning for modern bike builds. Its distinctive integrated bullmoose silhouette remains, while the handlebar has been widened to 750mm. The bar ends are raised by 10mm and paired with approximately 15° of backsweep, creating a position that allows the wrists to rest at a natural angle. The geometry is based on the combination of a 100mm NITTO UI-2 stem and 15° sweep. With a 135mm extension, it balances the classic appearance of an old-school MTB cockpit with proportions suited to contemporary riding styles. Made from chromoly by experienced NITTO craftspeople in Japan, the bar features smooth fillet finishing around the steerer junction. Its distinctive shape works well with mountain bikes, commuters, touring bikes, and track bike builds where a classic look is desired. 【FEATURES】 ・Wide version based on the FAIRWEATHER B903 ・750mm handlebar width ・Bar ends raised by 10mm ・Approximately 15° backsweep ・Geometry based on a 100mm NITTO UI-2 stem ・Classic integrated bullmoose construction ・Fillet-finished steerer junction ・Chromoly construction ・Made in Japan by NITTO ・Suitable for MTB, commuter, touring, and track bike builds 【SPEC】 ・Handlebar Width: 750mm ・Backsweep: Approx. 15° ・Bar Clamp Diameter: 22.2mm ・Steerer Diameter: 1-1/8 inch, oversized ・Steerer Stack Height: 40mm ・Extension: 135mm, equivalent to a 100mm UI-2 stem ・Material: Chromoly ・Color: DULL, BLACK ・Country of Origin: Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/fairweather-b923-bullmoose-bar

NITTO B812 Handlebar | A BLUE LUG Special-Edition Flat Bar for a Natural Riding Position Its subtly swept-back grip sections help create a relaxed, natural position for everyday riding, commuting, and touring. The NITTO B812 Handlebar is a Japanese-made aluminum flat bar developed as a special-edition model for BLUE LUG. Its defining feature is the distinctive bend that brings the grip sections slightly back toward the rider. This shape makes it easier to maintain a natural wrist angle and create a relaxed position without excessive reach. The extended grip area provides useful space for shifters and longer grips. With a manageable 610mm width, the B812 works well with cross bikes, MTBs, commuters, and touring builds. Made from thick-walled aluminum tubing, the B812 combines practical construction with NITTO’s precise manufacturing and refined finish. 【FEATURES】 ・Special-edition aluminum flat bar developed for BLUE LUG ・Distinctive swept-back grip sections ・Designed to create a natural, relaxed riding position ・Extended grip area for shifters and longer grips ・Manageable 610mm width ・Thick-walled aluminum construction ・Suitable for city riding, commuting, and touring ・Works well with cross bikes, MTBs, and commuter builds ・Made in Japan 【SPEC】 ・Product Name: NITTO B812 Handlebar ・Width: 610mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: 15.5mm ・Material: Aluminum ・Country of Origin: Japan ・Brand: NITTO ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-b812-handlebar

NITTO B812 Handlebar | A BLUE LUG Special-Edition Flat Bar for a Natural Riding Position Its subtly swept-back grip sections help create a relaxed, natural position for everyday riding, commuting, and touring. The NITTO B812 Handlebar is a Japanese-made aluminum flat bar developed as a special-edition model for BLUE LUG. Its defining feature is the distinctive bend that brings the grip sections slightly back toward the rider. This shape makes it easier to maintain a natural wrist angle and create a relaxed position without excessive reach. The extended grip area provides useful space for shifters and longer grips. With a manageable 610mm width, the B812 works well with cross bikes, MTBs, commuters, and touring builds. Made from thick-walled aluminum tubing, the B812 combines practical construction with NITTO’s precise manufacturing and refined finish. 【FEATURES】 ・Special-edition aluminum flat bar developed for BLUE LUG ・Distinctive swept-back grip sections ・Designed to create a natural, relaxed riding position ・Extended grip area for shifters and longer grips ・Manageable 610mm width ・Thick-walled aluminum construction ・Suitable for city riding, commuting, and touring ・Works well with cross bikes, MTBs, and commuter builds ・Made in Japan 【SPEC】 ・Product Name: NITTO B812 Handlebar ・Width: 610mm ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: 15.5mm ・Material: Aluminum ・Country of Origin: Japan ・Brand: NITTO ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-b812-handlebar

NITTO SYNC BAR | A Chromoly Riser Bar with Classic MTB Character Classic styling meets modern handling in a 700mm-wide chromoly riser bar inspired by one of NITTO’s earlier designs. The NITTO SYNC BAR reinterprets the elegant shape of a classic NITTO riser bar for contemporary riding styles. Its distinctive bends retain the character of vintage MTB handlebars, while the 700mm width provides a stable and controlled feel. This versatile shape works well for everyday city riding, touring, and custom bicycle builds. Made from chromoly, the SYNC BAR offers the responsive, flexible feel associated with steel handlebars while maintaining a clean, understated appearance. Its classic silhouette pairs naturally with vintage MTB restorations and commuter bikes. It is a practical choice for riders looking to change both their riding position and the overall character of their bicycle. 【FEATURES】 ・Modern reinterpretation of a classic NITTO riser bar ・Distinctive bends inspired by vintage MTB handlebars ・700mm width for stable handling ・Chromoly construction with a responsive feel ・Suitable for city riding and touring ・Well suited to vintage MTB and commuter builds 【SPEC】 ・Product Name: NITTO SYNC BAR ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 19mm ・Width: 700mm ・Material: Chromoly ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar

NITTO SYNC BAR | A Chromoly Riser Bar with Classic MTB Character Classic styling meets modern handling in a 700mm-wide chromoly riser bar inspired by one of NITTO’s earlier designs. The NITTO SYNC BAR reinterprets the elegant shape of a classic NITTO riser bar for contemporary riding styles. Its distinctive bends retain the character of vintage MTB handlebars, while the 700mm width provides a stable and controlled feel. This versatile shape works well for everyday city riding, touring, and custom bicycle builds. Made from chromoly, the SYNC BAR offers the responsive, flexible feel associated with steel handlebars while maintaining a clean, understated appearance. Its classic silhouette pairs naturally with vintage MTB restorations and commuter bikes. It is a practical choice for riders looking to change both their riding position and the overall character of their bicycle. 【FEATURES】 ・Modern reinterpretation of a classic NITTO riser bar ・Distinctive bends inspired by vintage MTB handlebars ・700mm width for stable handling ・Chromoly construction with a responsive feel ・Suitable for city riding and touring ・Well suited to vintage MTB and commuter builds 【SPEC】 ・Product Name: NITTO SYNC BAR ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 19mm ・Width: 700mm ・Material: Chromoly ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar

NITTO × BLUE LUG HiHi-bar | A Chromoly Riser Bar with Old-School BMX Character Inspired by classic BMX and klunker handlebars, the HiHi-bar combines the flexible feel of chromoly with a braced construction for confident control. The NITTO × BLUE LUG HiHi-bar is a special-edition chromoly version of BLUE LUG’s popular Hi-Bar, redesigned with a distinctive crossbar brace. Its classic silhouette recalls old-school BMX and klunker bikes, while the versatile shape works naturally with modern commuter, gravel, and vintage MTB builds. The chromoly construction provides a responsive, flexible feel, while the crossbar brace adds a balanced level of stiffness. This combination offers stable handling when riding out of the saddle or traveling over rough and unpaved surfaces. With a substantial 720mm width, the HiHi-bar creates a strong visual presence and helps transform both the riding position and overall character of a bike. It is a distinctive option for relaxed cruising, everyday riding, and gravel adventures. Manufactured in Japan by NITTO, the HiHi-bar brings together precise craftsmanship and BLUE LUG’s approach to functional bicycle customization. 【FEATURES】 ・Special-edition chromoly version of the BLUE LUG Hi-Bar ・Classic design inspired by old-school BMX and klunker handlebars ・Responsive feel of chromoly construction ・Crossbar brace for balanced stiffness ・Wide 720mm profile for stable handling ・Suitable for city riding and gravel rides ・Pairs naturally with vintage MTBs, gravel bikes, and commuter builds ・Made in Japan 【SPEC】 ・Product Name: 【NITTO × BLUE LUG】HiHi-bar ・Clamp Diameter: 25.4mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 19mm ・Width: 720mm (C-C) ・Material: Chromoly ・Country of Origin: Japan 【NOTICE】 ・Minor surface scratches may be present due to the characteristics of the product ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-blue-lug-hihi-bar