[KM4K x Cycle Hatena] PASS HUNTER BAG VILLAGE GREEN SPECIAL Ver. | A Frame Bag Built for Hike-a-Bike Adventures When riding alone is not enough. Push, shoulder your bike, and keep moving beyond the end of the road. The PASS HUNTER BAG is a frame bag designed around a different kind of cycling?one that may take you beyond paved roads, onto forest tracks, and into places where carrying your bike becomes part of the route. Inspired by triangular MTB bags with shoulder pads from the late 1980s and early 1990s, KM4K and Cycle Hatena reworked the concept with modern materials and a contemporary approach. It works as a compact frame bag for tools, snacks, a wallet, smartphone, and other small essentials, while the built-in shoulder pad can be used when carrying your bike. The VILLAGE GREEN SPECIAL Ver. features a GREEN body inspired by VILLAGE GREEN, together with a special VILLAGE GREEN version of the KM4K character patch. Designed for gravel rides, forest-road touring, and hike-a-bike routes, it also comes into its own when stairs, river crossings, or dead-end trails require you to shoulder the bike. Its distinctive triangular shape also adds an outdoor-inspired accent to OLD MTB, ATB, gravel, and touring builds. Features ・VILLAGE GREEN SPECIAL Ver. of the PASS HUNTER BAG by KM4K × Cycle Hatena ・Triangular shape inspired by late-1980s to early-1990s MTB culture ・Built-in shoulder pad helps reduce pressure on the shoulder when carrying the bike ・GREEN color inspired by VILLAGE GREEN ・Special VILLAGE GREEN version of the KM4K character patch ・Compact storage for tools, snacks, a wallet, smartphone, and other small essentials ・Attaches to the frame at three points with hook-and-loop straps ・Drawcord color cannot be selected SPEC ・Size: W170 × H170 × D45mm ・Material: DL-UHMWPE (Ultra-High-Molecular-Weight Polyethylene), 100% Nylon ・Color: GREEN ・Attachment: Hook-and-loop straps, 3-point attachment ・Recommended condition: Top tube and seat tube angle of 90 degrees or less ・Recommended bicycle weight: 15kg or less ・Attachment strap length: Front 16.5cm / Center 15.5cm / Lower 16.5cm Note ・The drawcord color cannot be selected. ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/pass-hunter-bag-village-green-special-ver

COG GOOD CREW CAB 2.0 (SPLATTER) | A Tough CORDURA Handlebar Bag Built to Be Used From everyday rides to gravel and camping trips, this is a GOOD CREW CAB made to be used without hesitation. From casual day rides to weekends loaded for touring, the COG GOOD CREW CAB 2.0 (SPLATTER) is a versatile handlebar bag designed around a free and flexible approach to carrying gear. The bag is made from durable CORDURA polyester, making it well suited to regular use on the bike as well as gravel rides, camping tours, and other gear-heavy outings. The distinctive SPLATTER finish also gives the bag a strong visual presence as part of your bike setup. On the GOOD CREW CAB 2.0, the front pocket is positioned inside the main bag structure to help keep the load more organized and stable. Six webbing straps also allow larger items that do not fit inside the bag, such as a sleeping bag or mat, to be secured externally. Keep it compact when carrying less, or use the external attachment points to expand your carrying options on longer trips. Inspired by the freedom of throwing gear into an American pickup truck, the CREW CAB concept brings that same flexible approach to carrying cargo by bicycle. STAFF REVIEW Compared with the lighter STEEL model, the SPLATTER version stands out for its tougher, more carefree character. It feels like a bag you can bring along regularly without being overly concerned about everyday scuffs or dirt, from normal rides to loaded touring. Its rugged construction also works naturally with the flexible carrying style of the GOOD CREW CAB. A sleeping bag or jacket can be strapped to the outside, while camping gear can be arranged according to the ride. The SPLATTER pattern adds another reason to choose it when you want the bag to become part of the bike's overall look. Features ・Durable CORDURA polyester construction ・Distinctive SPLATTER design adds visual character to the bike ・Front pocket positioned inside the bag structure ・Designed to keep loaded gear organized and stable ・Six webbing straps for securing larger items such as sleeping bags or mats externally ・Expandable design that adapts to different amounts of gear ・Suitable for gravel riding, touring, bikepacking, and day rides SPEC ・Material: CORDURA polyester ・Capacity: 3.6L and up ・Size: W250 × T160 ・Use: Gravel riding / Touring / Bikepacking / Day rides ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/cog-good-crew-cab-2-0-splatter

GROWTAC EQUAL Full Set / KASHIMA COAT Version | A Refined Mechanical Disc Brake System Ultralight construction, strong braking performance, and smooth operation maintained by the KASHIMA COAT finish. GROWTAC developed the EQUAL disc brake caliper to challenge the conventional limitations associated with mechanical disc brakes. The precision-machined super duralumin caliper is engineered as part of a complete system that also optimizes the inner cable, outer casing, and brake pads. At approximately 136g including the brake pads, it combines world-class lightweight construction with strong braking performance and precise modulation. EQUAL also features what GROWTAC describes as the world's first brake-feel adjustment system, allowing the braking response to be tuned to suit the rider's preference. Independent, continuously adjustable pad clearance on both sides makes detailed setup possible. This special version applies KASHIMA COAT to the caliper body and sliding components. The hard-anodized surface treatment incorporates molybdenum disulfide for high wear resistance and lubricity, helping reduce sliding resistance and allowing grease-free operation. It is designed to maintain a consistent braking feel over extended use. Suitable for road bikes, cyclocross, and gravel bikes, EQUAL retains the straightforward maintenance and serviceability of a mechanical system while delivering the braking performance and control required for demanding riding. STAFF REVIEW EQUAL stands out for more than braking power alone. It retains the accessibility and serviceability of a mechanical system while providing strong braking force and fine control at the lever. The KASHIMA COAT version feels especially smooth from the beginning of the lever stroke, and in our experience the braking feel changes very little over extended use. It is a compelling option for riders who value easy maintenance and train-assisted cycling trips, as well as those looking for reliable braking control for racing or gravel riding. Features ・World-class lightweight mechanical disc brake caliper at approximately 136g ・Precision-machined super duralumin construction ・System-level design including cables, outer casing, and brake pads ・Brake-feel adjustment system ・Independent, continuously adjustable pad clearance ・Strong braking performance with precise modulation ・KASHIMA COAT applied to the caliper body and sliding components ・High wear resistance and lubricity support grease-free operation ・Mechanical system suited to maintenance-focused riders and travel SPEC ・Brake Type: Mechanical disc brake ・Mount: Post Mount ・Weight: Approx. 136g including brake pads ・Material: Machined super duralumin ・Surface Treatment: KASHIMA COAT (hard anodizing + molybdenum disulfide) ・Brake Pads: Vesrah jointly developed EVO RESIN ceramic semi-metallic pads ・Inner Cable: Low-friction stainless steel ・Outer Casing: Low-deformation, high-transmission-efficiency type ・Compatible Levers: Cantilever brake levers / short-pull levers ・Not Compatible With: V-brake levers ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/growtac-equal-mechanical-disc-brake-caliper-kashima-coat-specification

GROWTAC EQUAL Full Set / KASHIMA COAT Version | A Refined Mechanical Disc Brake System Ultralight construction, strong braking performance, and smooth operation maintained by the KASHIMA COAT finish. GROWTAC developed the EQUAL disc brake caliper to challenge the conventional limitations associated with mechanical disc brakes. The precision-machined super duralumin caliper is engineered as part of a complete system that also optimizes the inner cable, outer casing, and brake pads. At approximately 136g including the brake pads, it combines world-class lightweight construction with strong braking performance and precise modulation. EQUAL also features what GROWTAC describes as the world's first brake-feel adjustment system, allowing the braking response to be tuned to suit the rider's preference. Independent, continuously adjustable pad clearance on both sides makes detailed setup possible. This special version applies KASHIMA COAT to the caliper body and sliding components. The hard-anodized surface treatment incorporates molybdenum disulfide for high wear resistance and lubricity, helping reduce sliding resistance and allowing grease-free operation. It is designed to maintain a consistent braking feel over extended use. Suitable for road bikes, cyclocross, and gravel bikes, EQUAL retains the straightforward maintenance and serviceability of a mechanical system while delivering the braking performance and control required for demanding riding. STAFF REVIEW EQUAL stands out for more than braking power alone. It retains the accessibility and serviceability of a mechanical system while providing strong braking force and fine control at the lever. The KASHIMA COAT version feels especially smooth from the beginning of the lever stroke, and in our experience the braking feel changes very little over extended use. It is a compelling option for riders who value easy maintenance and train-assisted cycling trips, as well as those looking for reliable braking control for racing or gravel riding. Features ・World-class lightweight mechanical disc brake caliper at approximately 136g ・Precision-machined super duralumin construction ・System-level design including cables, outer casing, and brake pads ・Brake-feel adjustment system ・Independent, continuously adjustable pad clearance ・Strong braking performance with precise modulation ・KASHIMA COAT applied to the caliper body and sliding components ・High wear resistance and lubricity support grease-free operation ・Mechanical system suited to maintenance-focused riders and travel SPEC ・Brake Type: Mechanical disc brake ・Mount: Flat mount ・Weight: Approx. 136g including brake pads ・Material: Machined super duralumin ・Surface Treatment: KASHIMA COAT (hard anodizing + molybdenum disulfide) ・Brake Pads: Vesrah jointly developed EVO RESIN ceramic semi-metallic pads ・Inner Cable: Low-friction stainless steel ・Outer Casing: Low-deformation, high-transmission-efficiency type ・Compatible Levers: Cantilever brake levers / short-pull levers ・Not Compatible With: V-brake levers ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/growtac-equal-mechanical-disc-brake-caliper-kashima-coat-specification

BLUE LUG YMC-W crank set | Classic 3-Arm Double Crankset A classic 3-arm crankset paired with 46/30T double chainrings for road, touring, and commuter builds. The BLUE LUG YMC-W crank set is a double crankset built around a distinctive 3-arm design that is rarely seen on modern components. Its understated design keeps logos and decoration to a minimum, while the 46/30T chainring combination makes it well suited to slender Chromoly road bikes, touring bikes, and commuter builds with a classic aesthetic. The chainring teeth are CNC-machined and then anodized, with attention given to strength and shifting performance. Their finish is designed to match the sheen of the crank arms, creating a clean and cohesive appearance. The crank arms feature an offset designed with chainstay and kickstand clearance in mind. It uses a JIS square-taper bottom bracket interface, with a recommended spindle length of 110?113mm. Available in 165mm, 170mm, and 172.5mm crank lengths, the YMC-W is a fitting choice for builds that combine a classic look with the versatility of a front double drivetrain. Features ・Classic 3-arm crank design ・46/30T double chainring setup ・CNC-machined and anodized chainrings ・Minimal logos and decoration ・Crank arm offset designed with chainstay and kickstand clearance in mind ・9-speed chain recommended ・JIS square-taper bottom bracket interface ・Available in 165mm, 170mm, and 172.5mm crank lengths ・Fixing bolts and crank caps included SPEC ・Brand: BLUE LUG ・Product: YMC-W crank set ・Chainrings: 46/30T ・Crank Length: 165mm / 170mm / 172.5mm ・PCD: 96mm ・Compatible Chain: 9-speed recommended ・BB Standard: Square Taper / JIS ・Recommended BB Spindle Length: 110?113mm ・Material: Aluminum ・Included: Fixing bolts, crank caps ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-ymc-w-crank-set

BLUE LUG YMC crank set | Classic 3-Arm Crankset for 1x Builds A classic 3-arm design paired with a 40T narrow-wide chainring for a clean and simple 1x drivetrain. The BLUE LUG YMC crank set is a 1x crankset built around a distinctive 3-arm design that gives it a classic appearance. With minimal logos and decoration, its understated look pairs naturally with slender Chromoly bikes, commuters, and single-speed builds. The crank arms feature an offset designed with clearance around the chainstay and kickstand in mind. The included 40T chainring uses a narrow-wide tooth profile, with alternating tooth widths designed to help retain the chain in a simple 1x drivetrain. It uses a JIS square-taper bottom bracket interface, with a recommended spindle length of 113mm. Three crank lengths are available: 165mm, 170mm, and 172.5mm. For bikes where you want to keep the drivetrain simple while maintaining a classic look, the YMC crank set offers a distinctive option for the build. Features ・Classic 3-arm crank design ・40T narrow-wide chainring for 1x drivetrains ・Minimal logos and decoration ・Crank arm offset designed with chainstay and kickstand clearance in mind ・Compatible with chains up to 11-speed ・JIS square-taper bottom bracket interface ・Available in 165mm, 170mm, and 172.5mm crank lengths ・Fixing bolts and crank caps included SPEC ・Brand: BLUE LUG ・Product: YMC crank set ・Chainring: 40T ・Crank Length: 165mm / 170mm / 172.5mm ・PCD: 96mm ・Compatible Chain: Up to 11-speed ・BB Standard: Square Taper / JIS ・Recommended BB Spindle Length: 113mm ・Material: Aluminum ・Included: Fixing bolts, crank caps ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-ymc-crank-set

BLUE LUG brass stem cap | A Subtle Brass Accent for Your Cockpit Add a small touch of brass to your cockpit with a finish that develops character over time. The BLUE LUG brass stem cap is an original stem cap designed for 1 1/8-inch oversized steerers. Made from solid brass, it has a deep, warm appearance that differs from anodized gold finishes. The surface gradually changes with use, allowing you to enjoy the natural character and patina of brass over time. Its machined construction provides a clean finish, making it an easy way to add a subtle detail around the stem. It works naturally with classic Chromoly bikes as well as commuter and touring builds. Pair it with brass spacers for a coordinated look, or use the stem cap alone as a small accent in your cockpit. Features ・BLUE LUG original stem cap ・Made from brass ・Deep, warm finish distinct from anodized gold ・Develops a natural patina with use ・Machined construction ・Compatible with 1 1/8-inch oversized steerers ・A subtle accent for the stem area SPEC ・Brand: BLUE LUG ・Product: brass stem cap ・Size: 1 1/8" (Oversized) ・Material: Brass ・Color: Brass ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-brass-stem-cap

BLUE LUG SHARK pedal | Low-Profile Machined Aluminum Flat Pedal A wide platform and low stack height in a machined aluminum pedal built for everything from city bikes to MTB. The BLUE LUG SHARK pedal is an original flat pedal machined from a solid aluminum billet. Its wide platform and low stack height provide a stable footing with a direct feel underfoot. The slim body keeps the shoe close to the pedal axle, creating a compact setup that works well for a wide range of bikes. The pedal is designed with durability, precise construction, smooth rotation, and secure shoe grip in mind. Suitable for track bikes and commuters as well as BMX and mountain bikes, the SHARK pedal is a versatile option for riders looking for a solid, low-profile flat pedal without being limited to a single riding style. Features ・BLUE LUG original flat pedal ・Machined from a solid aluminum billet ・Wide platform measuring approximately 10cm across ・Low stack height for a direct pedaling feel ・Designed to provide secure shoe grip ・Chromoly spindle ・Suitable for track bikes, commuters, BMX, and MTB ・Sold as a left and right pair SPEC ・Material: Aluminum ・Spindle: Chromoly ・Size: Approx. 10.5cm long × 10cm wide ・Sold As: Left and right pair ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-shark-pedal

OCEAN AIR CYCLES × NITTO erlen saddle bag support 2.0 | Clean Support for Larger Saddle Bags A streamlined saddle bag support developed by OCEAN AIR CYCLES and made in Japan by NITTO. The erlen saddle bag support 2.0 is designed to support the bottom of larger saddle bags, helping reduce sagging and movement when carrying gear. Unlike conventional supports that clamp around the seatpost or seat tube, it mounts at the saddle clamp area. This distinctive design keeps the area around the seatpost clean while providing a stable platform beneath the bag. Made from stainless steel and manufactured in Japan by NITTO, the support is designed around NITTO S65, S83, and S92 seatposts. The support measures approximately 17cm deep and 18.5cm wide, with a maximum load capacity of approximately 6.8kg. For trail riding, a load of 4.5kg or less is recommended. It works well for touring setups carrying clothing or rain gear, as well as everyday commuter bikes equipped with a larger saddle bag. Features ・Original saddle bag support design by OCEAN AIR CYCLES ・Mounts at the saddle clamp area ・Supports the bottom of a saddle bag to help reduce sagging and movement ・Stainless steel construction ・Designed around NITTO S65, S83, and S92 seatposts ・Maximum load capacity of approximately 6.8kg ・Made in Japan by NITTO ・Includes dedicated mounting bolts SPEC ・Material: Stainless Steel ・Rail Width: 44mm ・Size: Approx. 17cm deep × 18.5cm wide ・Maximum Load: Approx. 6.8kg ・Recommended Maximum Load for Trail Riding: 4.5kg ・Compatibility: Designed around NITTO S65, S83, and S92 seatposts ・Included: Dedicated mounting bolts ・Color: SILVER ・Made in Japan ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/ocean-air-cycles-nitto-erlen-saddle-bag-support-2-0

NITTO SYNC BAR XL | Wide Riser Bar Built for Trail Riding An 800mm-wide NITTO handlebar developed with BLUE LUG for trail riding, bike parks, and playful flat-bar builds. The NITTO SYNC BAR XL is a custom handlebar developed from feedback by members of BLUE LUG's “Monthly Mountain Cycling Club.” Its shape was created with trail riding, bike parks, jumps, and other active riding styles in mind. The 800mm width and 50mm rise provide a relatively high cockpit position suited to modern mountain bikes. A pronounced upward bend is combined with up to 19° of backsweep, giving the bar its distinctive shape. Compared with a typical low, flat MTB bar, it positions the grips higher and closer to the rider. While designed with mountain biking in mind, the SYNC BAR XL can also be used on fixed-gear bikes and flat-bar gravel builds when you want to give the bike a more playful setup. With its full 800mm width, the bar also gives you room to first test the position and handling before deciding how it best fits your bike and riding style. Features ・Custom NITTO model developed from feedback by BLUE LUG's “Monthly Mountain Cycling Club” ・Wide 800mm handlebar ・50mm rise for a relatively high cockpit position ・Up to 19° backsweep ・Distinctive shape with a pronounced upward bend ・Suitable for MTB, fixed-gear, and flat-bar gravel builds ・Made in Japan SPEC ・Material: Aluminum ・Width: 800mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 17mm ・Rise: 50mm ・Backsweep: Up to 19° ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar-xl

NITTO SYNC BAR XL | Wide Riser Bar Built for Trail Riding An 800mm-wide NITTO handlebar developed with BLUE LUG for trail riding, bike parks, and playful flat-bar builds. The NITTO SYNC BAR XL is a custom handlebar developed from feedback by members of BLUE LUG's “Monthly Mountain Cycling Club.” Its shape was created with trail riding, bike parks, jumps, and other active riding styles in mind. The 800mm width and 50mm rise provide a relatively high cockpit position suited to modern mountain bikes. A pronounced upward bend is combined with up to 19° of backsweep, giving the bar its distinctive shape. Compared with a typical low, flat MTB bar, it positions the grips higher and closer to the rider. While designed with mountain biking in mind, the SYNC BAR XL can also be used on fixed-gear bikes and flat-bar gravel builds when you want to give the bike a more playful setup. With its full 800mm width, the bar also gives you room to first test the position and handling before deciding how it best fits your bike and riding style. Features ・Custom NITTO model developed from feedback by BLUE LUG's “Monthly Mountain Cycling Club” ・Wide 800mm handlebar ・50mm rise for a relatively high cockpit position ・Up to 19° backsweep ・Distinctive shape with a pronounced upward bend ・Suitable for MTB, fixed-gear, and flat-bar gravel builds ・Made in Japan SPEC ・Material: Aluminum ・Width: 800mm ・Clamp Diameter: 31.8mm ・Grip Diameter: 22.2mm ・Inner Diameter: Approx. 17mm ・Rise: 50mm ・Backsweep: Up to 19° ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-sync-bar-xl

FAIRWEATHER × VOILE nylon buckle strap (camo / 20inch) | Versatile Strap for Bikepacking and Gear A FAIRWEATHER-exclusive Camo VOILE STRAPS?? for securing bikepacking gear, baskets, camping equipment, and more. The FAIRWEATHER × VOILE nylon buckle strap is a versatile securing strap designed for use on bicycles, outdoors, and around the garage. The strap is made from polyurethane and paired with a nylon buckle, allowing it to be tightened firmly around bags, gear, and other items. At 20 inches (approx. 50cm) long and 2cm wide, it is a practical size for securing bikepacking bags and gear, attaching a WALD basket to a rack, or bundling equipment together. Two straps can also be connected when additional length is needed. Beyond cycling, it can be used to organize camping gear, tools, and other equipment. Features ・FAIRWEATHER-exclusive Camo color ・20-inch VOILE STRAPS?? model ・Designed to tighten securely around gear ・Suitable for securing bikepacking bags and equipment ・Can be used to secure baskets and racks ・Two straps can be connected for additional length ・Suitable for bundling camping gear, tools, and other equipment SPEC ・Buckle: Nylon ・Strap: Polyurethane ・Size: 20inch (approx. 50cm) long × 2cm wide ・Color: Camo ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/fairweather-voile-nylon-buckle-strap-camo-20inch

BLUE LUG brass spacer (1-1/8) | Brass Steerer Spacer with a Distinctive Finish Add the warm, understated character of brass to your cockpit. The BLUE LUG brass spacer is an original steerer spacer designed for 1-1/8-inch steerer tubes. Unlike anodized gold finishes, solid brass has a deeper, more subdued appearance. Its surface gradually changes with use, allowing you to enjoy the natural patina that develops over time. The spacer features a slim profile that pairs particularly well with Chromoly stems, including those from NITTO. In addition to adjusting handlebar height, it offers a simple way to add a subtle brass accent around the stem and headset. Available in five heights?2mm, 5mm, 10mm, 20mm, and 35mm?it can be used for anything from fine position adjustments to setups requiring additional stack height. Features ・BLUE LUG original brass steerer spacer ・Warm, distinctive finish unique to brass ・Develops a natural patina with use ・Slim profile pairs well with Chromoly stems ・Available in 2mm, 5mm, 10mm, 20mm, and 35mm heights ・Compatible with 1-1/8-inch steerer tubes SPEC ・Steerer Diameter: 1-1/8" ・Height: 2mm / 5mm / 10mm / 20mm / 35mm ・Material: Brass ・Outer Diameter: 31.8mm ・Color: Brass ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-brass-spacer-1-1-8

BLUE LUG brass spacer (1-1/8) | Brass Steerer Spacer with a Distinctive Finish Add the warm, understated character of brass to your cockpit. The BLUE LUG brass spacer is an original steerer spacer designed for 1-1/8-inch steerer tubes. Unlike anodized gold finishes, solid brass has a deeper, more subdued appearance. Its surface gradually changes with use, allowing you to enjoy the natural patina that develops over time. The spacer features a slim profile that pairs particularly well with Chromoly stems, including those from NITTO. In addition to adjusting handlebar height, it offers a simple way to add a subtle brass accent around the stem and headset. Available in five heights?2mm, 5mm, 10mm, 20mm, and 35mm?it can be used for anything from fine position adjustments to setups requiring additional stack height. Features ・BLUE LUG original brass steerer spacer ・Warm, distinctive finish unique to brass ・Develops a natural patina with use ・Slim profile pairs well with Chromoly stems ・Available in 2mm, 5mm, 10mm, 20mm, and 35mm heights ・Compatible with 1-1/8-inch steerer tubes SPEC ・Steerer Diameter: 1-1/8" ・Height: 2mm / 5mm / 10mm / 20mm / 35mm ・Material: Brass ・Outer Diameter: 31.8mm ・Color: Brass ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-brass-spacer-1-1-8

BLUE LUG brass spacer (1-1/8) | Brass Steerer Spacer with a Distinctive Finish Add the warm, understated character of brass to your cockpit. The BLUE LUG brass spacer is an original steerer spacer designed for 1-1/8-inch steerer tubes. Unlike anodized gold finishes, solid brass has a deeper, more subdued appearance. Its surface gradually changes with use, allowing you to enjoy the natural patina that develops over time. The spacer features a slim profile that pairs particularly well with Chromoly stems, including those from NITTO. In addition to adjusting handlebar height, it offers a simple way to add a subtle brass accent around the stem and headset. Available in five heights?2mm, 5mm, 10mm, 20mm, and 35mm?it can be used for anything from fine position adjustments to setups requiring additional stack height. Features ・BLUE LUG original brass steerer spacer ・Warm, distinctive finish unique to brass ・Develops a natural patina with use ・Slim profile pairs well with Chromoly stems ・Available in 2mm, 5mm, 10mm, 20mm, and 35mm heights ・Compatible with 1-1/8-inch steerer tubes SPEC ・Steerer Diameter: 1-1/8" ・Height: 2mm / 5mm / 10mm / 20mm / 35mm ・Material: Brass ・Outer Diameter: 31.8mm ・Color: Brass ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/blue-lug-brass-spacer-1-1-8

NITTO cr-mo spacer (1-1/8) | Slim Chromoly Steerer Spacer A slim Chromoly spacer designed for a clean, well-matched finish around the stem. When you need to make a small adjustment to handlebar height after changing a stem or handlebar, a few millimeters can make a difference. The NITTO cr-mo spacer uses tubing with the same outer diameter as NITTO threadless stems. When combined, the matching diameter helps create a clean transition between the stem and spacers. Its thin-wall Chromoly construction gives the cockpit a slimmer appearance compared with typical aluminum spacers. Available in 3mm, 5mm, and 10mm heights, it is suitable for fine position adjustments or for creating a cleaner-looking steerer setup, particularly when paired with a NITTO threadless stem. Features ・Uses tubing with the same outer diameter as NITTO threadless stems ・Designed to create a clean transition between the stem and spacers ・Slim Chromoly construction ・Available in 3mm, 5mm, and 10mm heights ・Compatible with 1-1/8-inch steerer tubes ・Made in Japan SPEC ・Steerer Diameter: 1-1/8" ・Material: Chromoly ・Outer Diameter: 31.8mm ・Height: 3mm / 5mm / 10mm ・Color: Black / Chrome / Dull ・MADE IN JAPAN ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/nitto-cr-mo-spacer-1-1-8

【KM4K × Cycle Hatena】PASS HUNTER BAG ver.6 | A Carry-Friendly Frame Bag Inspired by '80s?'90s MTB Culture A triangular frame bag that combines the character of classic MTB culture with a built-in shoulder pad for rides that sometimes continue on foot. Leave the pavement, follow a forest road, push the bike when the terrain gets rough, and carry it when the route demands it. Created through a collaboration between KM4K and Kyoto-based Cycle Hatena, the PASS HUNTER BAG ver.6 is designed for this kind of flexible approach to cycling. Its triangular shape draws inspiration from MTB culture of the 1980s and 1990s, while modern materials and practical details bring the concept into the present. The defining feature is a built-in shoulder pad that helps reduce pressure on your shoulder when carrying the bike. The bag is made from lightweight, high-strength DL-UHMWPE nylon. Its compact size provides space for tools, snacks, a wallet, smartphone, and other ride essentials without taking over the frame. Three hook-and-loop straps secure the bag to the bike. The straps can be adjusted for length, and any excess can be trimmed if necessary. Available in BLUE, RED, and BLACK, the PASS HUNTER BAG ver.6 pairs naturally with OLD MTB builds while also adding a distinctive accent to gravel and touring bikes. More than simply carrying gear, the PASS HUNTER BAG opens up another way to use your bike. When a forest road or trail requires a short carry, the integrated shoulder pad comes into play, giving this compact frame bag a function beyond everyday storage. Features ・KM4K × Cycle Hatena collaboration PASS HUNTER BAG ver.6 ・Triangular shape inspired by 1980s?1990s MTB culture ・Built-in shoulder pad for carrying the bike ・Lightweight, high-strength DL-UHMWPE nylon construction ・Compact storage for tools, snacks, wallet, smartphone, and other essentials ・Attaches to the frame with three hook-and-loop straps ・Adjustable mounting straps can be trimmed if necessary ・Available in BLUE / RED / BLACK ・Drawcord color cannot be selected SPEC ・Size: W170 × D45 × H170mm ・Material: 100% DL-UHMWPE (ultra-high-molecular-weight polyethylene) nylon ・Color: BLUE / RED / BLACK ・Mounting: Three hook-and-loop straps ・Recommended condition: Top tube and seat tube angle of 90° or less ・Recommended bike weight: 15kg or less ・Mounting strap length: Front 16.5cm / Middle 15.5cm / Lower 16.5cm ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/pass-hunter-bag-ver-6

RawLow Mountain Works Beetle | Lightweight 18L Backpack for Day Hikes A compact 18L backpack made for light day hikes, nearby trails, and everyday use around town. Pack the essentials and head out for a casual day hike, then return to town without changing bags. RawLow Mountain Works Beetle is a compact backpack with approximately 18L of capacity and a weight of 350g, making it well suited to days when a larger pack is unnecessary. The body is made from RLMW’s standard 1000-denier nylon, giving the bag a firm, structured shape. It features a zippered main compartment, a large external pocket, and mesh side pockets for keeping frequently used items within easy reach. A frame built into the main opening allows the bag to open wide when unzipped, making it easier to pack, remove gear, and see the contents inside. Padded wide shoulder harnesses are included as standard. For those who find the 28L Bambi larger than necessary, Beetle provides a more compact option for carrying essential gear on low-mountain day hikes while remaining practical for everyday use. Features ・Compact backpack with approximately 18L capacity for day hikes and everyday use ・Made from RLMW’s standard 1000-denier nylon with a firm, structured feel ・Zippered main compartment ・Large external storage pocket ・Mesh side pockets provide easy access to bottles ・Framed opening allows the main compartment to open wide for easier access and visibility ・Padded wide shoulder harnesses included as standard SPEC ・Capacity: Approx. 18L ・Weight: 350g ・Main Material: 1000-denier nylon ・Main Compartment: Zipper closure ・Side Pockets: Mesh ・Shoulder Harness: Padded wide type ・Not packable ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/rawlow-mountain-works-beetle-1

RawLow Mountain Works Bambi | A Backpack That Moves Seamlessly Between Town and Trail Step off the train and head straight for the trail. Finish your hike and return naturally to the city. A backpack designed to blur the line between everyday life and hiking. RawLow Mountain Works Bambi is designed for accessible hiking trips that begin and end in town. Take the train to the trail, spend the day hiking, then head back without needing to switch bags or change the way you carry your gear. While equipped with the functionality needed for hiking, Bambi avoids an overly technical outdoor look. Its old-school RLMW styling makes it easy to use from day hikes and mountain hut trips to lightweight overnight trips with a carefully selected UL setup. The body and harness are balanced to carry the load higher on the upper body. A removable urethane foam back pad is included and can also be replaced with another pad to suit your preference. For storage, Bambi features a large external pocket and oversized side bottle pockets with approximately 1.5L of capacity on each side. Each side pocket can hold items such as two 500ml bottles, a 1L bottle, or an outer shell, keeping frequently used gear accessible without opening the main compartment. Attachment loops are positioned around the pack for arranging additional gear to suit your hiking style. Rather than relying on excessive features, Bambi focuses on practical storage and a straightforward carrying system for use both on the trail and around town. Features ・Old-school design suited to both hiking and everyday use ・Body and harness balance designed to place the load on the upper body ・Removable urethane foam back pad ・Large external storage pocket ・Oversized side bottle pockets with approximately 1.5L capacity per side ・Side pockets can hold two 500ml bottles, a 1L bottle, an outer shell, or similar items ・External attachment loops allow the pack to be arranged around different gear setups ・Suitable for day hikes, mountain hut trips, and lightweight overnight trips with a UL setup SPEC ・Main Material: Water-repellent 1000D nylon with 15% polyester blend ・Additional Materials: Spectra Grid 210D, X-PAC VX21 ・Back Pad: Removable urethane foam ・Side Bottle Pocket Capacity: Approx. 1.5L per side ・Capacity: 26?28L including external pocket capacity ・Weight: 500g ・Size: H450?600mm × W380mm × D190mm ・Back Length: 420mm ・Recommended Use: Day hikes, mountain hut trips, lightweight overnight trips with a UL setup ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/rawlow-mountain-works-bambi

RawLow Mountain Works Tabitibi Tote | A Compact 1?5L Bag That Adapts to the Journey Carry it compact when traveling light, then expand it into a tote when you need more room. A versatile little bag that adapts as your day changes. Whether carrying a map, wallet, and trail snacks on a hike or heading out by bike with a camera, the RawLow Mountain Works Tabitibi Tote is designed for days when you want to move with just the essentials. In its compact form, it works as an approximately 1L shoulder pouch. When you need more space, the side gusset expands from approximately 2cm to 14cm, while an approximately 8cm zippered top gusset stored inside can be opened to increase the total capacity to approximately 5L. The top gusset can also be folded inward to divide the interior into upper and lower storage areas. This flexible construction lets you adjust the layout for items such as a 500ml bottle, map, or cooking gear. Keep it compact when carrying only the basics, then expand it when you pick something up along the way or need to store an extra layer. Its adaptable size makes it useful not only for hiking, but also for cycling and everyday walks around town. The Tabitibi Tote can also be used to carry mirrorless, rangefinder, or compact DSLR cameras. However, the bag does not include protective cushioning, so cameras should be wrapped in a towel or used with a separate liner when additional protection is needed. Features ・Adjustable capacity from approximately 1L to a maximum of approximately 5L ・Side gusset expands from approximately 2cm to 14cm, transforming the bag from a shoulder pouch into a tote ・Approximately 8cm zippered top gusset can be deployed from inside the bag ・Top gusset can be folded inward to divide the interior into upper and lower storage areas ・Can carry items such as a 500ml bottle, map, or cooking gear depending on the situation ・Can also be used for mirrorless, rangefinder, and compact DSLR cameras ・Suitable for hiking, cycling, travel, and everyday use SPEC ・Capacity: 1?5L ・Weight: 120g ・Size: W27cm × H19.5cm ・Shoulder section: Cowhide leather Notes ・The leather may lose color if it becomes wet from rain or moisture ・Color may transfer if the leather rubs against light-colored clothing ・If the leather becomes wet, wipe it promptly with a dry cloth ・The bag does not include protective padding for camera storage ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/rawlow-mountain-works-tabitibi-tote-1

RawLow Mountain Works Bike’n Hike Post Bag | Ride, Carry, and Keep Exploring Ride to the trailhead, take the bag off your bike, and continue on foot. A saddle bag designed to connect cycling and hiking in one trip. RawLow Mountain Works Bike’n Hike Post Bag is designed for days when the ride is only part of the adventure. Cycle to your destination, remove the bag from the saddle, and carry it on your back when it is time to continue on foot. A long-running model produced since the early days of RawLow Mountain Works, the Bike’n Hike Post Bag has been updated with revised materials, design, and internal construction. Drawing on the styling of the Colorado Pack, this version uses heavy-duty CORDURA 1000D nylon. The internal reinforcement and side gussets have also been revised to improve stability when mounted to the saddle. The fabric is treated with a DW water-repellent finish for practical use across both cycling and hiking. Capacity is 8?10L, making it suitable for carrying items such as an extra layer and snacks on a day ride, or for compact packing on a touring trip. Its defining feature is the ability to carry the bag on your back after removing it from the bike. This makes it useful for train-assisted cycling trips, exploring on foot while traveling, or whenever you want to leave your bike without leaving your belongings behind. Additional details include a loop for attaching a tail light, a bungee cord woven with reflective material, and a key holder inside the pocket. For rides that continue beyond the bike, the Bike’n Hike Post Bag offers a flexible way to carry your gear from cycling to hiking and exploring on foot. FEATURES ・Saddle bag design that can also be carried on your back after removing it from the bike ・Revised internal reinforcement and side gussets for improved stability when mounted ・Made from CORDURA 1000D nylon ・DW water-repellent treatment ・Loop for attaching a tail light ・Bungee cord with reflective material woven into it ・Key holder inside the pocket ・Suitable for cycling, hiking, train-assisted cycling trips, and touring SPEC ・Capacity: 8?10L ・Material: CORDURA 1000D Nylon ・Treatment: DW Water-Repellent Treatment ・Colors: Sand / Terracotta ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/rawlow-mountain-works-bike-n-hike-post

RawLow Mountain Works Bambi ROBIC | A Minimal Backpack for the Trail and the City From day hikes to everyday life, Bambi's versatile design is reworked in a simpler, lighter ROBIC nylon construction. RawLow Mountain Works Bambi ROBIC is a backpack designed to move naturally between the outdoors and everyday life, whether you're heading out for a day hike or carrying it on your commute. It retains the practical size and features of the standard Bambi while using 210D ROBIC ripstop nylon, the same material used in the Rascal. The streamlined construction keeps the weight down to approximately 446g. Its solid, single-color design gives the pack a clean, minimal appearance that works just as naturally in the city as it does outdoors. With a 25?28L capacity and an approximately 420mm back length, the body and harness are balanced to place the load toward the upper body. It comes in a unisex one-size design intended to accommodate a wide range of users. The removable back pad is made from urethane foam and can be taken out when needed. Large pockets on both sides provide space for bottles as well as items such as sheets or mats, and the drawcords allow the pockets to be compressed. A gusseted front pocket provides additional storage and includes an internal key ring. With enough capacity for day-hike gear and a simple look suited to everyday clothing, Bambi ROBIC works well for hiking, commuting, and daily use. FEATURES ・ROBIC nylon version of the standard Bambi, retaining its practical size and features ・Made with 210D ROBIC Ripstop Nylon ・Lightweight construction at approximately 446g ・Body and harness balance designed to position the load toward the upper body ・Removable urethane foam back pad ・Large side pockets on both sides ・Side pockets can be compressed with drawcords ・Gusseted front pocket with an internal key ring ・Simple design suited to day hikes, commuting, and everyday use SPEC ・Material: 210D ROBIC Ripstop Nylon ・Weight: Approx. 446g ・Capacity: 25?28L ・Back Length: Approx. 420mm ・Size: Unisex, One Size ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/rawlow-mountain-works-bambi-robic

KiLEY NEXUS EYE (LM-021) | Wide Visibility in a Compact Mirror A compact bar-end mirror that adds useful rear visibility without disrupting the look of your bike. Whether riding through city streets or along busier roads, a rear-view mirror makes it easier to check what is happening behind you. KiLEY NEXUS EYE combines that practical function with a compact design that blends naturally with the bike. The machined aluminum body is paired with a 35mm convex glass mirror, providing an approximately 225° field of view. Its compact size makes it easy to incorporate into the clean appearance of road bikes and mini velos. It can be installed on either the left or right bar end and offers more than 270° of angle adjustment, allowing the viewing position to be fine-tuned to suit the bike and riding position. The mirror section uses a quick-release design and can be removed easily. This is useful when folding bikes such as BROMPTON or removing the mirror for train-assisted cycling trips. 【Features】 ・Machined aluminum body with a refined finish ・35mm convex glass mirror ・Approximately 225° field of view ・Can be installed on either the left or right bar end ・More than 270° of angle adjustment ・Quick-release mirror section for easy removal ・Fits handlebars with an internal diameter of 17.5-21mm ・Suitable for flat bars and drop handlebars ・One mirror for one side included 【SPEC】 ・Mirror diameter: 35mm ・Weight: 57g ・Compatible handlebar internal diameter: 17.5-21mm ・Body material: Aluminum, stainless steel ・Mirror material: Glass (convex mirror) ・Color: Silver, Black ・Contents: 1 mirror for one side ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/kiley-nexus-eye-lm-021

narifuri Mesh Bike Chino Pants NF5127 | Breathable Chino Pants for Summer Riding A familiar chino look with cycling-focused details, designed for comfortable movement through the warmer months. The narifuri Mesh Bike Chino Pants NF5127 update the brand's staple bike chinos with a revised design and silhouette for hot-weather riding and everyday use. Made from a structured grid-pattern polyester mesh fabric, they are designed to provide breathability and comfort in warm conditions. The silhouette retains the clean look of the original while adding slightly more room through the hips and legs, with waist pleats and articulated knee darts helping improve freedom of movement. Familiar cycling-focused details remain, including a double-layer reinforced seat, mesh pockets, and a dedicated Phone pocket. Elastic shirring at the sides of the waist helps reduce pressure when riding in a forward position. The articulated knee darts have also been revised to reduce restriction while pedaling. Adjustable straps at the hems allow the leg openings to be narrowed when riding, helping reduce interference around the chain. With the appearance of everyday chinos and details designed around cycling, these pants work naturally for summer city rides, day rides, and everyday wear off the bike. 【FEATURES】 ・Structured grid-pattern polyester mesh fabric for warm-weather breathability ・Elastic shirring and pleats at the waist help reduce pressure in a riding position ・Double-layer reinforced seat, mesh pockets, and dedicated Phone pocket ・Revised articulated knee darts help reduce restriction while pedaling ・Adjustable hem straps allow the leg openings to be narrowed when riding ・Updated silhouette with slightly more room through the hips and legs 【SPEC】 ・Brand: narifuri ・Model: NF5127 ・Material: 100% Polyester ・Country of Origin: China ・S: Waist 75-81cm / Hip 107cm / Thigh 34.8cm / Inseam 70.5cm / Hem Width 19.5cm ・M: Waist 79-85cm / Hip 111cm / Thigh 35.8cm / Inseam 72.5cm / Hem Width 20cm ・L: Waist 83-89cm / Hip 115cm / Thigh 36.8cm / Inseam 74.5cm / Hem Width 20.5cm ・XL: Waist 87-93cm / Hip 119cm / Thigh 37.8cm / Inseam 76.5cm / Hem Width 21cm ▼日本国内への配送ご希望は以下リンク先よりご購入手続きください。 https://store-eirin-jp.com/products/narifuri-mesh-bike-chino-pants-nf5127